Product Name
Skinny Metal Can Holder for Sublimation
Product Details
- Color: White
- Type: Insulating metal can holder
Compatibility:
- Holds tall, 15 oz skinny cans, 12 oz regular cans, and bottles
- Can be used as a regular tumbler with additional screw-on lid (included)
-
Includes screw on top for holding skinny cans and plastic straw (rubber bottom sold separately if desired)
Features:
- Shiny white sublimation coating for vibrant colors
- Suitable for use in a mug press or convection oven
- Convection oven use requires shrink wrap for pressure (sold separately)
Accessories (sold separately):
- Shrink wrap for convection oven use
- Rubber bottoms (sold separately)
Convection Oven Directions
- Apply sublimation transfer on the surface of the tumbler using heat tape.
- For full wrap designs, make sure you pull the transfer as tightly as possible around the tumbler, then tape very well along the seam and around the top/bottom of the tumbler.
- Pulling the tape/transfer as tight as possible with no air pockets.
- If your transfer does not fully cover the tumbler surface, apply blowout/butcher paper to the entire tumbler so that there is no metal showing on the sides.
- Apply shrink wrap using a heat gun to shrink it tight to the tumbler.
- Bake in a convection oven at approximately 385-400 degrees F for 5-6 minutes, turning halfway.
- If your tumbler is touching a metal surface during baking, the shrink wrap will be more likely to melt!
- Remove from oven and immediately remove shrink wrap and transfer.
- TUMBLER WILL BE HOT!! No sealant is necessary on sublimation tumblers.
Care Instructions:
- Hand wash recommended; dishwasher heat may cause bleeding
PLEASE NOTE:
- Equipment varies and so may your required settings.
- Please test your equipment using these baseline recommendations.
Additional Information
- For more information on sublimating these, please visit ACC Sublimation Blanks & Designs Facebook group for videos.