Product Name
Sippy Tumbler for Sublimation
Description
- Sippy tumbler for sublimation. Glossy white.
- Includes 2 lids for increased versatility.
- Sippy cup lid with curved handles and slider lid.
- Both lids are screw-on style.
- Includes plastic straw.
Product Details
- Shiny white sublimation coating that produces vibrant colors.
- For use in a mug press or convection oven.
- Convection oven requires shrink wrap to apply pressure during baking, sold separately.
- Accessories such as rubber bottoms are also available in a separate listing.
Convection Oven Directions
- Apply sublimation transfer on the surface of the tumbler using heat tape.
- For full wrap designs, make sure you pull the transfer as tightly as possible around the tumbler, then tape very well along the seam and around the top/bottom of the tumbler.
- Pulling the tape/transfer as tight as possible with no air pockets.
- If your transfer does not fully cover the tumbler surface, apply blowout/butcher paper to the entire tumbler so that there is no metal showing on the sides.
- Apply shrink wrap using a heat gun to shrink it tight to the tumbler.
- Bake in a convection oven at approximately 385-400 degrees F for 5-6 minutes, turning halfway.
- If your tumbler is touching a metal surface during baking, the shrink wrap will be more likely to melt!
- Remove from oven and immediately remove shrink wrap and transfer.
- TUMBLER WILL BE HOT!!
Care Instruction
- No sealant is necessary on sublimation tumblers.
- Hand washing is recommended as the high heat in many dishwashers may reactivate the heat and cause it to bleed.
Additional Information
- For more information on sublimating these, please visit ACC Sublimation Blanks & Designs Facebook group for videos.