RTS Sublimation Ceramic jar blank with bamboo lid, candle jar blank, succulent pot blank ACC Sublimation Blanks & Designs

Product Type:

White Ceramic Jar with Bamboo Lid

Description:

The white ceramic jar is sublimation-ready. 11oz size. Comes with a bamboo lid.

Usage:

• For use in a mug/tumbler press or convection oven.
• Convection oven requires the use of shrink wrap to apply pressure during baking, sold separately.

Convection Oven Directions:

• Apply sublimation transfer on the surface of the jar using heat tape.
• For full wrap designs, make sure you pull the transfer as tightly as possible around the tumbler, then tape very well along the seam, Pulling the tape/transfer as tight as possible with no air pockets.
• If your transfer does not fully cover the tumbler surface, apply blowout/butcher paper to the entire tumbler so that there is no ceramic showing on the sides (Protects the jar from shrink wrap).
• Apply shrink wrap using a heat gun to shrink it tight to the jar.
• Bake in a convection oven at approximately 375 degrees F for 12-14 minutes, turning halfway.
• Remove from oven and immediately remove shrink wrap and transfer.
• CERAMIC WILL BE HOT!! No sealant is necessary for sublimation.
• Hand washing is recommended as the high heat in many dishwashers may reactivate the ink and cause it to bleed.

PLEASE NOTE:

• Equipment varies and so may your required settings.
• Please test your equipment using these baseline recommendations.

Additional Feature:

The bamboo lid can be engraved! Use a laser engraver or wood-burning tool to add a design, words, or other details to the bamboo lid for extra personalization options!