RTS 20 oz GLOW IN THE DARK STRAIGHT Sublimation ready skinny tumbler ACC Sublimation Blanks & Designs

Product Type:

Skinny Tumbler for Sublimation

Product Details:

• Design: Straight version (no taper), 20 oz metal tumbler.
• Color Features: These are one color in normal light and change to glow-in-the-dark blue, green, or purple.
• Includes: Comes with a lid and a metal straw. (Rubber bottom sold separately if desired.)

Sublimation Coating:

• Shiny white sublimation coating that produces vibrant colors.
• For use in a mug press or convection oven.
• Convection oven requires the use of shrink wrap to apply pressure during baking, sold separately
• Accessories such as rubber bottoms and straw-cleaning brushes are also available in a separate listing.

Convection Oven Sublimation Directions:

• Apply sublimation transfer on the surface of the tumbler using heat tape.
• For full wrap designs, make sure you pull the transfer as tightly as possible around the tumbler, then tape very well along the seam and around the top/bottom of the tumbler.
• Pulling the tape/transfer as tight as possible with no air pockets.
• If your transfer does not fully cover the tumbler surface, apply blowout/butcher paper to the entire tumbler so that no metal is showing on the sides.
• Apply shrink wrap using a heat gun to shrink it tight to the tumbler.
• Bake in a convection oven at approximately 385-400 degrees F for 5-6 minutes, turning halfway.
• If your tumbler is touching a metal surface during baking, the shrink wrap will be more likely to melt!
• Remove from oven and immediately remove shrink wrap and transfer.
• TUMBLER WILL BE HOT!! No sealant is necessary on sublimation tumblers.

Note:

Hand washing is recommended as the high heat in many dishwashers may reactivate the ink and cause it to bleed.

PLEASE NOTE:

• Equipment varies and so may your required settings.
• Please test your equipment using these baseline recommendations.