Product Name:
Straight Lowball Tumbler for Sublimation, White
Description:
Straight metal wine tumbler with no seam, featuring a shiny white sublimation coating for vibrant colors.
Includes lid and straw; rubber bottom sold separately.
Features:
- Material: Metal
- Color: White
- Coating: Shiny white sublimation coating that produces vibrant colors
- Accessories: Includes lid and straw. (rubber bottom sold separately if desired)
Usage:
- For use in a mug press or convection oven.
- Convection oven requires the use of shrink wrap to apply pressure during baking, sold separately.
- Accessories such as rubber bottoms and straw-cleaning brushes are also available in a separate listing.
Convection Oven Directions:
- Apply sublimation transfer on the surface of the tumbler using heat tape.
- For full wrap designs, make sure you pull the transfer as tightly as possible around the tumbler, then tape very well along the seam and around the top/bottom of the tumbler.
- Pulling the tape/transfer as tight as possible with no air pockets.
- If your transfer does not fully cover the tumbler surface, apply blowout/butcher paper to the entire tumbler so that there is no metal showing on the sides.
- Apply shrink wrap use a heat gun to shrink shrink wrap tight to the tumbler.
- Bake in a convection oven at approximately 385-400 degrees F for 5-6 minutes, turning halfway.
- If your tumbler touches a metal surface during baking, the shrink wrap will be more likely to melt!
- Remove from oven and immediately remove shrink wrap and transfer.
- TUMBLER WILL BE HOT!! No sealant is necessary on sublimation tumblers.
PLEASE NOTE:
- Equipment varies and so may your required settings.
- Please test your equipment using these baseline recommendations.
Cleaning:
Hand washing is recommended as the high heat in many dishwashers may reactivate the ink and cause it to bleed.