Product Type:
Glass Bottle Tumblers for Sublimation
Product Details:
- Size: 16oz
- Material: Frosted glass, sublimation ready
- Colors: Available in multiple ombre colors
- Accessories: accessories such as metal straws and straw-cleaning brushes are also available in a separate listing.
Usage:
- Can be used in a mug/tumbler press or convection oven.
- Convection oven requires the use of shrink wrap for pressure during baking (sold separately).
Convection Oven Directions:
- Apply sublimation transfer on the surface of the glass using heat tape.
- For full wrap designs, pull the transfer as tightly as possible around the tumbler, then tape very well along the seam, Pulling the tape/transfer as tight as possible with no air pockets.
- If your transfer does not fully cover the tumbler surface, apply blowout/butcher paper to the entire tumbler so that there is no glass showing on the sides (Protects the cup from shrink wrap).
- Apply shrink wrap using a heat gun to shrink it tight to the glass can.
- Bake in a convection oven at approximately 375 degrees F for 6.5-8 minutes, turning halfway.
- Remove from oven and immediately remove shrink wrap and transfer. GLASS WILL BE HOT!!
Note: No sealant is necessary on sublimation
PLEASE NOTE:
- Equipment varies and so may your required settings.
- Please test your equipment using these baseline recommendations.
Cleaning:
Hand washing is recommended as the high heat in many dishwashers may reactivate the ink and cause it to bleed.
Caution:
As with all glass products, avoid extreme temperature changes, as this may cause cracking or even explosion of the glass.
Additional:
The bamboo lid can be engraved! Use a laser engraver or wood-burning tool to add a design, words, or other details to the bamboo lid for extra personalization options!