Product:
Kid’s/Youth Sublimation Tumbler
Product Details:
- Color: Shimmer White
- Design: Completely straight version
- Includes: Lid and straw (Choice of color)
- Capacity: 12 oz
- Coating: Shimmer white shimmer sublimation coating for vibrant colors
- Compatibility: For use in a convection oven
- Accessories: Shrink wrap required for pressure application (sold separately), rubber bottoms, and straw cleaning brushes are available in a separate listing
Convection Oven Directions:
- Apply sublimation transfer on the surface of the tumbler using heat tape.
- For full wrap designs, make sure you pull the transfer as tightly as possible around the tumbler, then tape very well along the seam and around the top/bottom of the tumbler.
- Pulling the tape/transfer as tight as possible with no air pockets.
- If your transfer does not fully cover the tumbler surface, apply blowout/butcher paper to the entire tumbler so that there is no metal showing on the sides.
- Apply shrink wrap using a heat gun to shrink it tight to the tumbler.
- Bake in a convection oven at approximately 385-400 degrees F for 5-6 minutes, turning halfway.
- If your tumbler is touching a metal surface during baking, the shrink wrap will be more likely to melt!
- Remove from oven and immediately remove shrink wrap and transfer (caution: tumbler will be hot)
Note:
- No sealant is necessary on sublimation tumblers.
- Hand washing is recommended as the high heat in many dishwashers may reactivate the heat and cause it to bleed